AGC ELECTRONICS TAIWAN INC

Fluon® ETFE Film is a high-performance fluoropolymer film manufactured by AGC from our raw material. Due to its very good properties of heat resistance, chemical resistance, optical transparency, and non-adhesiveness, it has a wide variety of applications from electronics, aircrafts and solar cells to kitchen products and wallpaper.

Features
Applications
Technical

Good weatherability and optical transparency
Fluon® ETFE Film offers good light transparency, allowing ultraviolet light and sunlight to pass through. It features good weatherability from ultraviolent to infrared light, and provides strong light transparency and mechanical properties even when left exposed outdoors for a long time.
Superior heat-resistance and chemical resistance
Fluon® ETFE Film is a UL standard 94VTM-0 flame retardant material that can be used in a wide range of temperatures (from -200°C to 200°C). It has good resistance against most chemicals like strong acid or strong alkaline chemicals.
Good non-adhesiveness and advanced mechanical properties (flexibility)
Fluon® ETFE Film features good non-adhesiveness, releasability, and stain resistance that are characteristic of fluorine. It is also highly flexible, and demonstrates an uniaxial tensile elongation of 400% or more even under room temperature. Its strong non-adhesiveness and flexibility mean that it can be used in a wide variety of instances as a release film or stain resistant film.

Semiconductor mold release film
Release film for electronics

Product Type	Description
12N 1200S 1000m	Standard transparent/glossy film.
21GS 1220NT 1000m	Gray-colored film.
25N 1250NT 1000m	Standard transparent/glossy film.
40N 1250NT 500m	Standard transparent/glossy film.
50N 1250NT 500m	Standard transparent/glossy film.
100N 1250NT 250m	Standard transparent/glossy film.
25MW 1250NT 1000m	Standard transparent/matte finished (both sides) film.
50MW 1250NT 530m	Standard transparent/matte finished (both sides) film.
50HK(KN) 1250NT 530m	Standard transparent/matte finished (single side) film. HK features a matte finish on the wind-out side, while KN features a matte finish on the wind-in side.
50LM 1250NT 510m	High elongation grade transparent/glossy film.
200NJ 1600NT 250m	It is transparent/glossy and it is well-suited for use as roof/exterior material.
250NJ 1600NT 200m	It is transparent/glossy and it is well-suited for use as roof/exterior material.

For more technical information download:

https://www.agc-chemicals.com/jp/en/fluorine/products/etfefilm/download/index.html

Please leave a message for more information

Inquiry

Link to Japanese
official website